No action is required by the user and the components update is completed with an automatically activated system restart. (*) during this phase the device may need to perform programmed hardware restarts, which will cause the RUN/STOP LED to turn off. zip archive and copy the file with the proper extension to the root folder of an USB stick plug the USB stick into the Router USB port and cycle the power.ĭuring the power up phase, the Router recognizes the presence of the USB Stick with the update and it will immediately start the system software update procedure.īy means of a proper visual feedback the user will be informed about the status of the operation, in particularl when UBIQUITY Router recognizes a valid update and starts the update procedure the LED RUN/STOP emits 3 green flashes then during the update the flashes of the LED become alternated red / green and as a conclusion of the procedure are re-emitted 3 green flashes. For convenience, the UBIQUITY updates are distributed on the company websiteĪs the content of a compressed archive in. img for second-generation UBIQUITY Router. asr (ASEM Software Repository) for first-generation UBIQUITY Router, while the extension is. The container files are identified with extension. The software components upgrades are distributed in the format of a single file that works as a “container” for the components to be replaced. It can be planned and guarantees immediacy and security, however, if you have physically available the device you can always proceed with a local update. The actual versions of the software components are visible in the System information section accessible at the bottom of the Router Configuration screen when working with the ethernet connection or with the web configuration page.Įvery UBIQUITY Router software component can be replaced by a simple and fully automated procedure (see chapter Updating UBIQUITY Runtime and Router. Premium HMI (available only for some models)
UBIQUITY Router is a hardware device that works thanks to a set of software components they can be divided in: Update and restore of the system software ¶
0 kommentar(er)
